Hitachi DH 50MB Power Hammer User Manual


 
22
English
7. Groove digging and edging (Hammering)
8. Asphalt cutting (Hammering)
9. Digging
10. Surface Roughing (Hammering)
11. Tamping (Hammering)
12. Syringe (for chip removal)
NOTE:
Specifications are subject to change without any obligation on the part of the
HITACHI.
(1) Cold chisel
Overall length Code No.
11" (280 mm) 313473
15-3/4" (400 mm) 313474
(1) Cutter
Overall length Width Code No.
15-3/4" (400 mm) 1-31/32" (50 mm) 313473
(1) Scoop
(1) Bushing Tool
Code No. 313477
(2) Shank
Overall length Code No.
8-21/32" (220 mm) 313479
(1) Rammer
Code No. 313478
(2) Shank
Overall length Code No.
8-21/32" (220 mm) 313479
Code No. 313476
Code No. 944575