Filter
Top Products
CAUTION
During use, do not touch the switch.
(The switch will turn off or the mode will switch.)
Avoid continuous use.
It will strain your lips and cause lip trouble.
How to install the rubber head if it is removed
When removing the cotton swab, the rubber head
may come off together. Fig.20)
If it comes off together with the cotton swab, remove the
cotton swab from the rubber head, and push the rubber
head into the electrode of the main body. Fig.21)
Electrode
7. After use, put on the lower cap.
1. Apply lip balm to your lips.
Use your regular lip balm.
(Lipstick, lip gloss, and other makeup cannot be used.)
If colored lip balm is used, the main body may be
discolored.
Step II Heating care mode
Never use this product if there is some
wound or chapping of your lips.
(Cause of lip trouble or pain)
Use this product only for lips and their
peripheries (outline).
(Cause of accidents or trouble)
2. Press the switch twice. (Fig.22)
(1) You will hear an operating sound (double short beep),
and the heating mode indication lamp will flash.
(2) In about 30 seconds, the heating head becomes
usable, and the heating mode indication lamp
changes from flashing to lighting.
If the battery is running down or the ambient
temperature is low, a longer time will be required.
CAUTION
Use this product at an ambient temperature of
15°C - 35°C.
If it is used under 15°C:
The battery life will become shorten.
The heating head will take a long time to warm up.
The heating mode indication lamp will go out.
(End of battery life)
3. Apply the heating head to your lips, and move it as if
sliding it.
(1) Using the side of the heating head, move it from the
centers of your lips toward the corners of the mouth.
(Fig.23)
(2) Using the round portion at the top of the heating head,
move it in a circular pattern. (Fig.24)
(3) Using the entire heating head, move it along the
outline of your lips in a circular pattern. (Fig.25)
Wipe away the lip balm adhering to the heating head
and main body with tissue paper, etc.
Lightly pat off the lip balm remaining on your lips and
outline with a tissue.
To stop using in mid-process, press the switch once.
4. An automatic stop is made when 2 minutes have elapsed
since switching to the heating mode. (Auto-off function)
If an automatic stop is made, an ending sound
(double beep) will be heard.
5. After use, put on the upper cap.
CAUTION
Never wash the main body with water
Make sure to wipe away the lip balm adhering to
the heating head.
(Cause of a failure or unusual odor by entry of lip
balm into the main body)
Care for the main body
Wipe dirt on the main body with a cloth moistened with
water and firmly squeezed.
Do not use alcohol, benzine, or thinner.
(Cause of deformation or discoloration)
Do not wash the main body with water.
And, do not soak in water or splash
water on it. (Cause of a failure)
Make sure to turn OFF the power switch.
(Improperly turning on the switch may
cause irritation or a malfunction or short
circuit.)
CAUTION
How to preserve
Put on the upper and lower caps, and keep in an area of
low humidity with little dust.
When not using this product for one
month or more, take out the battery.
(Cause of a failure)
Do not leave this product in places
splashed with water or in damp places,
such as in a bathroom.
(Cause of a failure)