Filter
Top Products
– 14 –
Driving
This nailer is equipped with the push lever and dose not operate unless the push lever is
depressed(upward position).
There are two methods of operation to drive nails with this nailer.
(1) Single sequential actuation(Trigger fire)
WARNING
ⅷ First nail is driven regardless of the contact action.
• Position the nail outlet on the workpiece with finger off the trigger.
• Depress the push lever firmly it is completely depressed.
• Pull the trigger to drive a nail.
• Remove finger from the trigger.
To drive another nail, move the Nailer along the workpiece and
repeat this procedure.
(2) Contact action
• Pull the trigger with the Nailer off the work piece.
• Depress the push lever against the workpiece to drive a nail.
• Move the Nailer along the workpiece with a bouncing motion.
Each depression of the push lever will drive a nail.
As soon as the desired number of nails have been driven, remove
finger from the trigger.
WARNING
ⅷ Keep your finger off the trigger except during fastening operation, beacuse serious injury could result if the
push lever accidentally contacts you or others in work area.
ⅷ Keep hands and body away from the discharge area. The nailer with contact trip mechanism may bounce
from the recoil of driving a fastener and unwanted subsequent fastener may be driven, possibly causing
injury.
ⅷ Some types of loaded nails can spark out of the muzzle during a nail driving operation. Exericise caution!
Nose cap
Put the nose cap accordingly.
Pushing it into the top of push
lever can put the nose cap.
Nose cap can be removed from the
push lever using a screwdriver or
thin rod.
Nose cap can be stored on the magazine as shown below.
.
2 Depress the push lever
1 Pull the trigger
2 Depress the push lever
1 Pull the trigger
Push lever
Nose cap
Magazine
Nose
Slot
Push lever
Nose cap
Screwdriver
Nose cap