Filter
Top Products
– 8 –
English
Do not lift this saw by the arm that holds the blade,
this may result in damage to the tool.
UNPACKING AND CHECKING CONTENTS
● To avoid injury, if any part is missing or damaged,
do not plug the scroll saw in until the missing
or damaged part is replaced, and assembly is
complete.
● To avoid fire and toxic reaction, never use
gasoline, naphtha, acetone, lacquer, thinner or
similar highly volatile solvents to clean the scroll
saw.
Carefully unpack the scroll saw and all its parts and
compare against the illustration following.
1. Remove the scroll saw from the carton by lifting the
saw by the back of the upper frame.
2. Place the saw on a secure surface and examine it
carefully.
UNPACKING YOUR SCROLL SAW
I
CARTON CONTENTS
WARNING
ITEM DESCRIPTION QUANTITY
A
Scroll saw assembly 1
B
Blade 1
C
Hex wrench 1
STAND
D Short upper support 2
E Long upper support 2
F Leg 4
G Short bottom support bracket 2
H Long bottom support bracket 2
I Stand hardware bag 1
WARNING
WARNING
A
B
C
D E
F
G
H
I