Filter
Top Products
English
— 10 —
SPECIFICATIONS
STAPLE SELECTION
WARNING
ⅷ Be sure to use only the genuine
HITACHI staples for the N5024A2,
N5021A. The use of any other staples
can result in tool malfunction and/or
staple breakdown, leading to serious
injuries.
Only staples shown in the Table below can
be driven with this Stapler.
Dimensions of staples for N5024A2
Operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
2
)
Dimensions 14-3/8" × 9-13/16" × 3"
Length × Height × Width (365 mm × 250 mm × 76 mm)
Weight 4.7 lbs. (2.1 kg)
Staple capacity 150 Staples
.40 ft
3
/cycle at 100 psi
Air consumption
(1.1 ltr/cycle at 6.9 bar)
(1.1 ltr/cycle at 7 kgf/cm
2
)
Dimensions of staples for N5021A
.917"
(23.3mm)
.057"
(1.45mm)
1"
(25mm)
.063"
(1.61mm)
16 Gauge 1”
Min. Max.
Crown staple
2" (50mm)
.807"
(20.5mm)
.052"
(1.33mm)
5/8"
(16mm)
.064"
(1.63mm)
16 Gauge
15/16”
Min. Max.
Crown staple
2" (50mm)
ACCESSORIES
WARNING
ⅷ Accessories other than those shown
below can lead to malfunction and
resulting injuries.
STANDARD ACCESSORIES
1 Safety glasses 1
1
01Eng_N5024A2_US 12/26/08, 11:0610