Filter
Top Products
English
— 21 —
PROBLEM CHECK METHOD CORRECTION
Skipping staples. Check for proper staples. Use only recommended
Intermittent feed. staples.
Staple feeder damaged? Replace staple feeder.
Ribbon spring weakened Replace ribbon spring.
or damaged?
Piston O-ring worn or Contact Hitachi for
damaged? replacement.
Staples jam. Check for proper staples. Use only recommended
Driven staple is bent staples.
Driven blade worn? Contact Hitachi for
replacement.
Drives properly during Check inside diameter of air Use larger air hose.
normal operation, hose.
but does not drive fully
at faster stapling speeds.
01Eng_N5024A2_US 12/26/08, 11:0721