Filter
Top Products
English
— 17 —
2) the Stapler is always held firmly against
the workpiece.
If staples are driven too deep or shallow into
the workpiece, adjust the stapling in the
following order.
1 DISCONNECT AIR HOSE FROM
STAPLER.
2 If staples are driven too deep, turn the
adjuster to the shallow side.
If staples are driven too shallow, turn the
adjuster to the deep side.
3 Stop turning the adjuster when a suitable
position is reached for a stapling test.
4 Connect the air hose.
ALWAYS WEAR SAFETY GLASSES.
Perform a stapling test.
5 DISCONNECT AIR HOSE FROM
STAPLER.
6 Choose a suitable position for the
adjuster.
Disconnect
air hose
15
Adjuster
2
Too deep
Turn adjuster
Flush
2
Too shallow
Turn adjuster Flush
01Eng_N5024A2_US 12/26/08, 11:0717