Filter
Top Products
5
ACCESSORIES
Hoover polishers are equipped with spring loaded brushes and pads in
order to obtain the best results even on floors with uneven surface.
For this reason, the small narrow brush positioned on the front of the
hood is also spring loaded.
Three kits of brushes and pads are supplied with the polisher:
Yellow Hard Bristle Brushes (Depending on model)
To be used to remove the old polish then to spread the new wax evenly on
the floor. Particularly suitable for marble and tiles.
Black Soft Bristle Brushes
Must be used to complete the first polishing phase. Suitable for all hard floors.
Grey Buffing Pads
To be used during the final polishing phase for producing a high gloss.
They can be used on all hard surfaces, but are especially suitable for marble
and tiles.
Natural White Pads ( Depending on model)
These natural white pads, made mainly of wool, have been especially
designed to polish wooden floors. They should be used after the Black soft
bristle brushes.
TO WAX AND POLISH THE FLOORS
TO WAX THE FLOORS
Before applying polish, ensure that the surface is clean. Remove any greasy
stains using a damp cloth.
To apply the polish, follow the instructions supplied with the polish.
Use a good quality polish, spreading it evenly. After the polish has
dried, polish the floor with the yellow hard texture brushes or the
softer black brushes.
TO POLISH THE FLOORS
For producing a high gloss, use the natural white pads for wooden floors or
grey buffing pads for all other hard surfaces.
To obtain better results, always move the polisher in straight lines rather than
in circles.
Buffing pads should only be used after the whole surface has first been
polished with brushes.
GB