Hoover hard floor polisher Sander User Manual


 
7
GB
SIMPLE USER CHECK LIST BEFORE CALLING FOR
SERVICE
1) Is there a working electricity supply to the polisher? Check with another
appliance.
2) Is a restriction causing the bag check indicator to be activated in use?
If yes: Is the dust bag full? Please refer to chapter "Fitting the Paper Dust Bag".
Please remember: A service charge will be made if the polisher is examined and
found to be in working order, has not been assembled in accordance with these
instructions, or has been misused.
DO
Call your nearest Hoover Service Centre in the event of dissatisfaction
Ensure that all service and repairs are carried out by an authorised Hoover Service
Engineer.
Only use genuine Hoover parts.
Replace the paper dust bag as soon as the bag check indicator activates.
Always switch off and remove the power plug from the electricity supply after use
and before cleaning the appliance or attempting user maintenance as described in
these instructions.
Remember: Electricity can be dangerous.
DO NOT
Use your polisher out of doors, on wet surfaces or for wet pick up.
Pick up matches, hot ashes, cigarette ends or anything that may damage the
product.
Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as
this may cause risk of fire/explosion.
Run over, stand on, or wrap the power cord around arms or legs when using your
cleaner
Remove the plug by pulling on the power cord.
Continue to use your polisher if it or the plug/power cord appears to be faulty or
damaged. To avoid safety hazards the polisher must only be repaired by an
authorised Hoover Service Engineer.
TECHNICAL ASSISTANCE SERVICE
Please contact the nearest Hoover Spare Parts Point for any information and for the
supply of spare parts.
Ensure that all the repairs are carried out by Hoover authorised personnel only.
Before cleaning and maintenance by the owner, remember to switch off the appli-
ance and pull out the plug.