Filter
Top Products
26
7
PRIORITY WATCH
■ Priority watch operation
◊Memory channel watch and memory scan
watch
q Select VFO mode; then, set an operating frequency.
w Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [↔] for 2 sec. to start
memory scan.
e Push [FUNC] + [(MODE)SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
r Rotate [DIAL] to select “Priority” or “PRIo.”
•“PRIo” disappears after 1 sec.and “oFF”and “PR”appears when
color LCD is OFF.
t Push [↔] or rotate the tuning dial while pushing [FUNC] to
select priority watch ON or priority watch ON with alert
(BELL).
•If the pocket beep function is activated, the receiver automatically
selects the tone squelch function when the priority watch is se-
lected.
y Push [(MODE)SET] to exit set mode and start the watch.
•The receiver checks the memory channel frequency every 5 sec.
•The watch resumes according to the selected scan resume con-
dition. (p.22)
•If the priority watch with alert is ON, you can be alerted with
beeps and a flashing “P.B”or “ë.”
•If the direction finding screen is selected, the receiver automati-
cally selects the simple screen when the priority watch starts.
u Push [V/M] while the display shows the VFO frequency to
stop the watch.
FM
PRIO
RX
S1 3 5 7 9
VOL
RX
FM
145.765.000
M:A18
PRIO
TS 15.0
While pausing on the memory channel,
“PRIO” flashes.
Priority watch set
mode
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : 10SEC
Priority : ON
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : 10SEC
Priority : BELL
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Priority watch is ON. Priority watch with
alert is ON.