2 04662995_ed4
WARNING
General Product Safety Information
• Read and understand this manual before operating this starter.
• It is your responsibility to make this safety information available to others that will operate this starter.
• Failure to observe the following warnings could result in injury.
WARNING
• For safety, maximum performance and maximum durability of parts, do not operate ST600 Starters at air pressures
over the pressure rating stamped on the nameplate. Use supply lines of adequate size as directed in the installation
instructions in this manual.
• Do not use damaged, frayed or deteriorated air hoses & fittings.
• Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any
accessory on this starter, or before performing any maintenance on this starter.
• Operate Model ST600 Starters on compressed air only. They are not designed or sealed for operation on
compressed gas.
• Do not lubricate starters with flammable or volatile liquids such as kerosene or jet fuel.
• For personal protection, do not remove any labels. Replace any damaged labels.
• Use only recommended Ingersoll Rand accessories.
• Operate this starter only when properly installed on the engine.
• Always wear eye protection when operating or performing maintenance on this Starter.
• Always wear hearing protection when operating this Starter.
• This product is not designed for working in explosive environments, including those caused by fumes & dust, or
near flammable materials.
• This product is not insulated against electric shock.
• Keep hands, loose clothing, long hair and jewelry away from working end of product.
• Shaft and/or accessories may briefly continue their motion after throttle is released.
• Never use a damaged or malfunctioning product or accessory.
• Do not modify this product, safety devices, or accessories.
• Do not use this product for purposes other than those recommended.
NOTICE
• The use of other than genuine Ingersoll Rand Replacement parts may result in safety hazards, decreased starter
performance, increased maintenance, and may invalidate all warranties.
• Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll Rand Authorized
Service Center.
• Ingersoll Rand is not responsible for customer modifications of starters for applications on which Ingersoll Rand
was not consulted.
• It is the responsibility of the employer to place the information in this manual into the hands of the operator.
Safety Information - Explanation of Safety Signal Words
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or property damage.
Indicates information or a company policy that relates directly or indirectly to the safety of
personnel or protection of property.
DANGER
WARNING
CAUTION
NOTICE
Safety Symbol Identification
(Dwg. MHP2598)
Wear Respiratory
Protection
Wear Eye
Protection
Wear Hearing
Protection
Read Manuals Before
Operating Product