Filter
Top Products
4
2. Remove the safety stopper
from the console drawer.
CAUTION: The safety
stopper is designed to prevent
the drawer from sliding out
during transportation: Once
it’s removed, the drawer may
slide out when tilted and
cause serious injury or damage.
3. Slide the console drawer
into the rack cabinet from
the front and insert the two
slide rails of the console
drawer into the sleeves of
the rear brackets.
4. Fasten the console drawer
to the outside of the front
vertical uprights using the
four screws provided. The
metal brackets (as indicated
by the far arrow) support the
rear side of the console.
NOTE: The image at right is
a front (console drawer-side)
view.
5. Remove both of the rear
brackets and slide the
console drawer out halfway
to balance its weight. At this
point, the front brackets hold
the console drawer. NOTE:
The image at right is a rear
(KVM switch module-side)
view.
4