Intellinet Network Solutions 521796 Welding Consumables User Manual


 
88
Replaceable Keyboard and Touchpad
Replaceable Keyboard (Models 523561 and 523578 only):
The keyboard is replaceable for language change or maintenance. Tilt it up,
locate the mini-USB cable underneath the keyboard and gently unplug it. While
installing a keyboard, make sure that you extend just enough of the cable to
keep the keyboard flat inside the tray. NOTE: The triangular mark on the mini-
USB connector must face out, as shown in the magnified image above.
Replaceable Touchpad (Models 523561 and 523578 only):
The touchpad simulates a wheel mouse. The area of the touchpad to the right
side of the two small triangular
marks is the simulated “wheel,”
as shown at right.
To remove the touchpad, press
the tab underneath it upward
to release the latch, then slide
it outward till the touchpad
can be lifted up clear of the
notches, as shown below.
The touchpad is attached by
a piece of mini-USB cable.
Triangular mark