Filter
Top Products
77
Console Panel
The console panel of the Rackmount Console KVM Switch is located along
the top of the keyboard. The image below represents the console panel for
Models 521796 and 521871.
The image below represents the console panel for Models 523561 and 523578.
KVM Control and Status Indicators:
NOTE: This section is effective only when a KVM switch module is connected.
1. Computer Selection Pad — Press one of these buttons to select a computer.
For 16-port Model 521871, “1” – ”8” are for the lower row of eight ports and
“A” – ”H” are for the higher/upper row of eight ports. Port 1 and Port A share
the same button: If Port 1 is already selected, tap its button to select Port A.
If Port 1 is not selected, press and hold the “1” button on the console panel
for two seconds to select Port A.
2. Selected Computer Indicator — An indicator lights red when its corresponding
computer is selected.
3. Local Console in Operation — This lights green when a computer is accessed
through the console.
4. Remote Console in Operation — This lights green when a computer is accessed
by a remote keyboard/mouse/monitor set.
LCD Panel Controls:
5. LCD Panel Menu — These buttons bring up the on-screen display menu of
settings for the LCD panel.
6. LCD Panel Adjustment — These let you adjust the settings for the LCD panel.
7–9. Number lock, caps lock and scroll lock indicators, respectively.
10. LCD panel power switch.
5
4
6
8
9
7
10