Filter
Top Products
6
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for a JET Model 22-44 Plus Drum Sander. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web
site: www.waltermeier.com.
Specifications
Model Number ......................................................................................................................22-44 Plus
Stock Number ........................................................................................................................ 649003K
Maximum Width (in.) ..................................................................................................... 44 (two passes)
Minimum Length (in.) .................................................................................................................... 2-1/4
Maximum Thickness (in.)..................................................................................................................... 4
Minimum Thickness (in.) ................................................................................................................ 1/32
Drum Size (in.) ............................................................................................ 5 x 22 Extrusion, Aluminum
Drum Speed (RPM) ...................................................................................................................... 1700
Dust Chute (in.) .................................................................................................................................. 4
Conveyor Motor ................................................................................ 43 inch-lb. torque, direct drive D.C.
Conveyor Variable Feed Rate (FPM) .......................................................................... 0-10 (SandSmart)
Motor (TEFC) .................................................................................................. 1-3/4HP, 1Ph, 115V only
Net Weight (lbs.) ............................................................................................................................. 231
Shipping Weight (lbs.) ..................................................................................................................... 254
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.