Filter
Top Products
7
Unpacking
1. Remove all contents from the shipping carton.
2. Report any damage to your distributor.
3. Do not discard any shipping material until after
the dust collector has been assembled and is
running properly.
Contents of the Shipping Carton
DC-650A Contents
1 – Base
1 – Owner's Manual
1 – Warranty Card
1 – Motor Assembly
1 – Motor Cooling Fan
1 – Collector Bag
1 – Filter Bag
4 – Casters
1 – Support Cylinder
1 – Retaining Strap
1 – Filter Bag Support Rod
1 – Bag of Assembly Hardware
4 – M6 x 12 Cap Screws
5 – M6 Lock Washers
5 – M6 Flat Washers
2 – 3/8"-16 Acorn Nuts
2 – 3/8" Hex Nuts
4 – M10 Flat Washers
4 – M8 x 12 Cap Screws
4 – M8 Flat Washers
1 – M6 Hex Nut
Tools Required for Assembly
2 14mm Wrenches or Sockets
1 10mm Wrench or Socket
DC-650C Contents
Canister Filter Box
1 – Canister Filter
1 – Handle
1 – Bag of Hardware for Handles
2 – M10 Hex Nuts
2 – M10 Flat Washers
1 – M10 Lock Washer
4 – Knobs
1 – M8 Hex Nut
1 – M8 Flat Washer
1 – M8 Lock Washer
DC-650C Box
1 – Base
1 – Owner's Manual
1 – Warranty Card
1 – Motor Assembly
1 – Motor Cooling Fan
5 – Collector Bags
1 – Snap Ring
4 – Casters
1 – Support Cylinder
1 – Bag of Assembly Hardware
4 – M6 x 12 Cap Screws
4 – M6 Lock Washers
4 – M6 Flat Washers
2 – 3/8"-16 Acorn Nuts
2 – 3/8" Hex Nuts
4 – M10 Flat Washers
4 – M8 x 12 Cap Screws
4 – M8 Flat Washers
Tools Required for Assembly
2 14mm Wrenches or Sockets
1 10mm Wrench or Socket
1 17mm Wrench
Read and understand the entire contents of this manual before attempting set-up or
operation! Failure to comply may cause serious injury.