Filter
Top Products
6
Introduction
This manual is provided by JET covering the safe operation and maintenance procedures for a Model
JWBS-14 Band Saw. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed
and constructed to provide years of trouble free operation if used in accordance with instructions set forth
in this manual. If there are any questions or comments, please contact either your local supplier or WMH
Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.
Specifications
Model Number:........................................................JWBS-14OS.......................................... JWBS-14CS
Stock Number..................................................................708113................................................708115K
Cutting Capacity (height/in.)...................................................... 6............................................................6
Cutting Capacity (width/in.) ............................................... 13-1/2....................................................13-1/2
Minimum Blade Width (in.)..................................................... 1/8.........................................................1/8
Maximum Blade Width (in.).................................................... 3/4.........................................................3/4
Blade Length (in.) ............................................................. 93-1/2....................................................93-1/2
Blade Speed (SFPM)...........................................................3000......................................................3000
Table Size (in.) ................................................................15 x 15.................................................. 15 x 15
Table Slot Size (DxW/in.)...............................................3/8 x 3/4................................................ 3/8 x 3/4
Table Height From Floor (in.).................................................. 44....................................................43-1/2
Table Tilt (deg.) ................................................... 45 right, 10 left.......................................45 right, 10 left
Dust Port Diameter (in.) ............................................................ 4............................................................4
Overall Dimensions (HxWxD/in.).............................. 68 x 34 x 20...........................................68 x 26 x 19
Motor................................ 3/4HP, 1Ph, 115/230V (prewired 115).......1HP, 1Ph, 115/230V (prewired 115)
Net Weight (lbs.)................................................................... 172........................................................185
Shipping Weight (lbs.)........................................................... 183........................................................197
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WHM Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.