Filter
Top Products
OPERATING INSTRUCTIONS
Be aware that this tool is always in an operating condition
because it does not have to be plugged into an electrical outlet. Always turn
the switch “OFF” and remove the battery pack before changing bits.
OPERATING THE TRIGGER SWITCH
OPERATING THE TRIGGER SWITCH
Never tape the trigger switch down to provide
continuous high speed. The tool may fail under such conditions causing fire
or personal injury.
The lock-off button helps prevent accidental starting.
This button can be pressed from either side.
THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH:
Press the lock-off button, then pull the “ON/OFF” trigger to turn the Circular Saw
“ON”.
To turn the Circular Saw “OFF”, release the trigger switch. The lock-off button will
automatically reset.
18
ADJUSTING DEPTH AND ANGLE
ADJUST CUTTING DEPTH:
1. Remove the battery pack.
2. Hold the saw firmly and loosen the
depth adjustment knob by turning
it counter-clockwise.
3. Move the shoe to obtain the desired
depth of cut.
4. Tighten depth adjustment knob
securely by turning clockwise
before operating the saw.
ADJUST BEVEL ANGLE:
1. Remove the battery pack.
2. Loosen the bevel angle knob by
turning it counter-clockwise.
3. Adjust the angle of your cut.
4. Tighten the angle knob securely
by turning clockwise.
17
45º
DEPTH
ADJUSTMENT
KNOB
BEVEL
ANGLE
KNOB
LOCK-OFF BUTTON
TRIGGER SWITCH