ACCESSORIES
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.
If you must use an extension cord, be sure that the gauge is large enough to carry
the amount of current necessary for your power tool. If not, your tool may experi-
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge
number, the heavier the cord (see table below).
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS
TOOL CURRENT RATING CONDUCTOR SIZE IN A.W.G
AMPERE 10FT. 25FT. 50FT. 100FT.
3-6 18 18 18 18
6-8 18 18 18 16
8-10 18 18 18 14
10-12 16 16 14 14
12-16 14 12 12 -
16-20 12 12 12 -
SPECIFICATIONS
SPECIFICATIONS
Voltage 19.2V
Switch On/Off Switch
Charger Input 120V 60Hz
Charging Time Approx. 1 hour
No Load Speed (RPM) 3700/Min.
Blade Diameter 140mm (5-1/2")
Battery Type Ni-Cad
Laser Class II
Laser Power 1.0mw(min.)
2.0mw (max.)
Laser Wavelength 650nm
Laser Beam Diameter 1mm (at aperture)
24
MAINTENANCE AND CLEANING
Always remove the battery pack before attempting
cleaning or maintenance.
This Circular Saw is lubricated before it leaves
the factory. This lubrication should last for the life of the tool. No further
lubrication is required.
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get
inside the casing. Never immerse any part of the tool in a liquid. Always keep the
ventilation openings clear.
Always clean the battery pack using only a dry cloth. Do not use liquids.
Always unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and charger using only a soft
brush or dry cloth.
Inspect all mounting screws regularly. Tighten any loose screws. Failure to keep
the mounting screws tight could result in serious injuries.
Never open the Cordless Circular Saw case, battery pack or charger. Do not
attempt to repair the Cordless Circular Saw, battery pack or charger yourself.
Opening any of these parts will void your warranty.
23