Filter
Top Products
TP-6880 10/1450 Section 3 RDC2 Controller Operation
3.20 Load Control Module (LCM) or
Load Shed Kit Menus
The Load Control menu displays the status of the Load
Control Module (LCM) or load shed kit inputs and
outputs, and allows a test of the LCM or load shed kit
output relays. This menu appears only if an LCM or load
shed kit is connected.
Generator current is displayed as a percent of the
maximum generator capacity. The load control module
or load shed kit adds and sheds loads based on the
generator current.
The test function cycles the relays in the order of their
priority. For detailed information about the LCM
operation, refer to TT-1574, provided with the LCM kit.
For detailed information about the Load Shed kit
operation, refer to TT--1609, provided with the Load
Shed kit.
Input 1:
In/Active
Output 1:
Add/Shed
Input 2:
In/Active
Output 2:
Add/Shed
Output 3:
Add/Shed
Output 4:
Add/Shed
Output 5:
Add/Shed
Output 6:
Add/Shed
Test Outputs
Push Select
(blinking)
<---- Return
tp6810
Load ---->
Control
Load ---->
Control 1
<---- Return
Generator
Current: 123 %
Figure 3-25 Load Control Module (LCM) or Load Shed Kit Status Menu