TP-6880 10/14 9Introduction
Introduction
This manual provides operation and maintenance
instructions for residential/commercial model
8/10/12RESVand RESVLgenerator setsequipped with
Kohler RDC2 or DC2 generator set/transfer switch
controllers. See Figure 1. The RDC2 and DC2
controllers control the generator set and the optional
Model RXT transfer switch.
This generator set is approved for use in stationary
applications in locations served by a reliable utility
power source. Have the generator set installed by an
authorized distributor/dealer or service technician.
Refer to TP-6879, Installation Manual, for installation
instructions.
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this publication and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation andto avoid bodilyinjury. Read and followthe
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The equipmentservice requirements are veryimportant
to safe and efficient operation. Inspect the parts often
andperform requiredservice attheprescribed intervals.
Obtain service from an authorized service distributor/
dealer to keep equipment in top condition.
Figure 1 RESV/RESVL Generator Set
List of Related Literature
Figure 2 identifies related literature available for the
generator sets coveredin this manual. Only trainedand
qualified personnel should install or service the
generator set.
Generator Set Literature Part Number
Installation Manual, Model
8/10/12RESV/RESVL Generator Set
TP-6879
Transfer Switch Literature
Operation/Installation Manual, Model
RXT Automatic Transfer Switch
TP-6807
Operation/Installation Manual, Model
RDT Automatic Transfer Switch
TP-6345
Installation Manual, Model RSB
Automatic Transfer Switch
TP-6486
Operation Manual, Model RSB
Automatic Transfer Switch
TP-6487
Accessory Literature
Operation Manual, OnCuer Plus
Software
TP-6928
Operation Manual, SiteTecht Software TP-6701
Installation Instructions, Load Control
Module (LCM)
TT-1574
Installation Instructions, Programmable
Interface Module (PIM)
TT-1584
Instructions, Firmware Update Using
USB Utility
TT-1636
Instructions, Load Shed Kit TT-1609
Figure 2 Related L iterature