Filter
Top Products
P - 10
1. Name and function of each part
Picture of power source as viewed from above
(The figure seen from the top)
F Main unit's charger indicating lamp
When the power pack inside of the main unit, which is set
at the main unit's charger, is being charged, the indicating
lamp comes on to emit orange light. When charging is
complete, it comes on to emit green light.
E Power source indicating lamp
When the power switch is turned on, the
indicating lamp comes on to emit blue light.
G Main unit's charger (also serving as a base
for holding slit-lamp)
With the power switch turned on, push the slit-lamp deep
into the receptacle, to enable the power pack inside of
the main unit, to be charged.
H Inlet
To be connected to the power cable
I Power switch
For turning on/off the
power source.
J Power pack charger
For charging the power pack taken out from the main unit
or a spare power pack.
K Power pack charger indicating lamp
When the power pack set at the power pack
charger is being charged, the indicating lamp
comes on to emit orange light. When charging is
complete, the indicating lamp comes on to emit
green light.
L Fuseholder
Replace a blown-out fuse by a designated new one.
(The figure seen from the bottom)