Filter
Top Products
2.
Preparation
P - 12
IN
1 Open the grip cover 2 Mount the power pack 3 Close the grip cover
2-1 Setting
Place the power source on a stable table and connect the power cable to the inlet on the back of the power source.
Connecting the power cable
4 Insert the power cable deep into the inlet at the back of power source while holding the main unit tightly.
5 Turn on the power switch to start charging.
Make sure the power source indicating lamp is on emitting blue light and the main unit's charger indicating lamp is on
emitting orange light.
When charging is complete, light which the indicating lamp emits will switch to a green one.
After inserting the power cable into the main unit, make sure the indicating lamps are on emitting light of specified
color.
4 Insert the main unit 5
Make sure the indicating the lamp works normally.
2-2 Charging the power pack inside of the main unit
1 Open the grip cover by pulling it out toward you while depressing the rubber portion of grip cover downward.
2 Make sure the power pack is orientated in a right direction before mounting it on the main unit.
3 Hook the claw located at the lower portion of grip cover to close the grip cover.