Filter
Top Products
P - 13
2-3 Charging a single power pack independently of the main unit
2-3 Charging a single power pack independently of the main unit
1 Insert the power pack deep into the power pack charger while holding it in the direction of photo.
2 Make sure the power pack charger indicating lamp is on emitting orange light. When charging is complete, light which
the indicating lamp emits will switch to a green one.
1 Insert the power pack. 2
Make sure the indicating lamp works normally.
2-4 How to fit optional item (forehead rest)
1 Open the cover located on an upper portion of the main unit by a pointed stick.
2 Tighten screws by an object such as a piece of coin to fit the forehead rest.
1 Open the cover 2 Tighten screws.
Do not short-circuit the terminals of the main unit's charger or a power pack charger. Keep
each charging board away from any metallic object such as any clip and nail to avoid a fire
or electrical shock.
When operating the forehead rest fixed with locking screws, tightly fasten them
beforehand, to keep them from slackening during operation.
Otherwise, the forehead rest may accidentally jerk toward you to get you injured.
3Rotating and loosening the lock-
ing screw springs the forehead
rest back and forth.