Leica 760498a Stud Sensor User Manual


 
10
Functions
Leica DISTO™ D3 760498a en
EN
F
E
P
Functions
Addition / subtraction
Distance measuring.
The next measurement is added to the previous
one.
The next measurement is subtracted from the
previous one.
This process can be repeated as required. The result
is always shown in the summary line with the
previous value in the second line.
The last step is cancelled.
Area
Press once. The symbol appears in the
display.
Press this button to take the first length
measurement (e.g. length).
Press it again to take the second length
measurement (e.g. width).
The result is displayed in the summary line.
Press the button for longer to calculate the
circumference.
Volume
Press this button twice. The symbol
appears in the display.
Press this button to take the first length
measurement (e.g. length).
Press this button to take the second length
measurement (e.g. width).
Press this button to take the third length
measurement (e.g. height). The value is shown in the
second line.
The volume then appears in the summary line.
Press the button for longer to display additional
room information such as ceiling/floor area, surface
area of the walls, circumference.
Tilt measurement
)
The inclination sensor measures tilts between
± 45°.
)
During tilt measurement the instrument
should be hold without a transverse tilt (± 10°).
Press this button once to activate the tilt
sensor. The symbol appears in the display. The
tilt is continuously shown as ° or % depending on the
setting.
Press to measure the inclination and the
distance. See figure {J}.