Leica 760498a Stud Sensor User Manual


 
2
Safety Instructions
Leica DISTO™ D3 760498a en
EN
F
E
P
Opening of the equipment by using tools (screw-
drivers, etc.), as far as not specifically permitted
for certain cases
Carrying out modification or conversion of the
product
Use after misappropriation
Use of accessories from other manufacturers
without the express approval of Leica Geosys-
tems.
Deliberate or irresponsible behaviour on scaf-
folding, when using ladders, when measuring
near machines which are running, or near parts of
machines or installations which are unprotected
Aiming directly into the sun
Deliberate dazzling of third parties; also in the
dark
Inadequate safeguards at the surveying site (e.g.
when measuring on roads, construction sites,
etc.)
Limits of use
)
See section “Technical Data“.
The Leica DISTO™ is designed for use in areas perma-
nently habitable by humans, do not use the product
in explosion hazardous areas or in aggressive envi-
ronments.
Areas of responsibility
Responsibilities of the manufacturer of the orig-
inal equipment Leica Geosystems AG, CH-9435
Heerbrugg (for short Leica Geosystems):
Leica Geosystems is responsible for supplying the
product, including the User Manual and original
accessories, in a completely safe condition. (addi-
tional language versions can be found at:
www.disto.com.
Responsibilities of the manufacturer of non-
Leica accessories:
)
The manufacturers of non-Leica accessories
for the Leica DISTO™ are responsible for developing,
implementing and communicating safety concepts for
their products. They are also responsible for the
effectiviness of these safety concepts in combination
with the Leica Geosystems equipment.
Responsibilities of the person in charge of the
instrument:
ƽ
WARNING
The person responsible for the instrument
must ensure that the equipment is used in accor-
dance with the instructions. This person is also
accountable for the deployment of personnel and for
their training and for the safety of the equipment
when in use.
The person in charge of the instrument has the
following duties: