Lincoln Electric 300 Welder User Manual


 
Simple wire harnessing keeps connections to a minimum for greater
reliability. Lead and harness strain reliefs on all control connections
help ensure trouble-free performance.
Engine Protection System includes automatic shutdown for low oil
p
ressure or high engine temperature.
Indicator light turns on for low oil pressure or high engine
temperature. A second indicator light turns on if the engine
battery charging system malfunctions.
Circuit breaker protection on the battery ignition system provides
added component protection.
Environmental friendly engine! Engine has a closed breather
s
ystem to keep the engine compartment and ground clean. This
system eliminates oil mist from collecting inside the engine
compartment, especially on surfaces that would lower engine
cooling efficiency.
Self-bleeding engine simplifies startup if your fuel tank runs dry.
Kubota
®
and Deutz
®
engine camshafts are gear-driven. No timing
belt maintenance.
Printed circuit boards are environmentally-
shielded using Lincoln’s engineered potting
and protective frame trays.
Dependability and long life aided by
a
ll-copper windings in rotor and stator
with high quality insulation.
Standard stainless steel roof, side panels and engine-access door
deliver added protection, durability and corrosion-resistance.
Eliminates the need to paint or replace rusting panels.
Approved by the Canadian Standards Association (CSA).
Manufactured under a quality system certified to ISO 9001
r
equirements and ISO 14001 environmental standards.
Three-Year Lincoln Warranty (parts and labor) on welder.
(Engine is warranted separately by the manufacturer.)
Dimensions (6)
P
roduct Ordering CC/Pipe-Rated DC Output(1) CV Rated Output(1) H x W x L Weight
Name Information Description Current/Voltage/Duty Cycle Current/Voltage/Duty Cycle AC Power(3)(4) inches (mm) lbs. (kg)
Vantage
®
300 K2409-2 300 Amp DC Welder with DC Constant Current DC Constant Voltage(2) 12,500 Peak 35.9 x 25.3 x 60.0 in 1035 lbs.
K
ubota
®
E
ngine Gauges 300A/32V/100% 300A/32V/100% Watts, 60 Hz (913 x 642 x 1524mm) (469 kg)
350A/28V/100% 350A/28V/100%
V
antage
®
3
00 K2499-2 12,500 Watts Peak 30-400 Amps Two 120V 1150 lbs
Deutz
®
11,000 Watts 14-32V Duplex GFCI (522 kg)
Continuous AC Power DC Pipe Current Single Dial Receptacles
3-Phase 300A/32V/100% Continuous Control 20A Per Duplex
40-300A 40A Total (5)
11,500 Watts Peak Touch-Start TIG
®
Range Wire Feeder Power 1-Phase
10,000 Watts 250A/30V/100% 120V/60Hz Full KVA
Continuous AC Power 20-250 Amps 42V/60Hz Receptacle
1-Phase 42A@240V
Single Dial 42A@120V Each
Continuous Control Branch Circuit(5)
60V DC Max OCV
@1890 RPM 3-Phase
Full KVA
Receptacle
27A@240V
Vantage
®
300
www.lincolnelectric.com
[4]
A CLOSER LOOK
MACHINE SPECIFICATIONS
(1) High Altitude: For maximum rating, derate the output 2.5% to 3.5% for every 1,000 ft. (300 m). High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C)
above 104°F (40°C).
(2) DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.
(3) When welding, available auxiliary power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.
(4) 120V will operate either 60Hz or 50/60 Hz power tools, lights, etc.
(5) Circuits cannot be wired in parallel to operate the same device. (6) Height is to top of case. Add 5 in. (127 mm) to top of exhaust elbow for Kubota
®
and for Deutz
®
.
QUALITY AND RELIABILITY
ENGINE SPECIFICATIONS
(7) Kubota
®
warranty is 2 years/2,000 hours for machines shipped within the U.S., Canada, Pacific Ocean region and Western Europe. Warranty is 1 year/1,000 hours for Central
and South America, Asia, Africa and Middle East.
(8) Deutz
®
warranty is 2 years/2,000 hours for all components, 3 years/3,000 hours for major components.
Product Horsepower & Operating Fuel
Name Description Displacement Capacities Speeds Consumption
Kubota
®
V1505 (7) 4 Cylinder, 4 Cycle 22 HP@1800 RPM FUEL:
300A Load 1.2 Gal/Hr
Water-Cooled Diesel Engine, 15 gals (57 ltrs)
1800 RPM 4.4 Ltr/Hr
12V Electric Start, 91 cu in OIL: High Idle 0.4 Gal/Hr
Dry Type Air Cleaner, (1.5 ltrs) 6.4 qts (6.0 ltrs) 1890 RPM 1.5 Ltr/Hr
Fuel Filter with Water Separator RADIATOR COOLANT:
Low Idle 0.3 Gal/Hr
EPA Tier 4i 7.2 qts (6.8 ltrs)
1350 RPM 1.1 Ltr/Hr
Deutz
®
D2008L4 (8) 4 Cylinder, 4 Cycle 24 HP@1800 RPM FUEL:
300A Load 1.2 Gal/Hr
Water-Cooled Diesel Engine, 15 gals (57 ltrs)
1800 RPM 4.4 Ltr/Hr
12V Electric Start, 95 cu in OIL: High Idle 0.5 Gal/Hr
Dry Type Air Cleaner, (1.6 ltrs) 7.8 qts (7.4 ltrs) 1800 RPM 1.8 Ltr/Hr
Fuel Filter with Water Separator RADIATOR COOLANT:
Low Idle 0.3 Gal/Hr
EPA Tier 4i 7.9 qts (7.5 ltrs)
1400 RPM 1.3 Ltr/Hr