Filter
Top Products
RECOMMENDED OPTIONS
LN-23P Wire Feeder
P
ortable CV unit for Innershield pipe
welding. Includes drive rolls and guide
t
ubes. Requires K2393-1 or -2 Input
C
able Assembly and Magnum
®
Innershield
®
Gun.
O
rder K316L-2
I
nput Cable Assembly for LN-23P
8-socket to 14-pin control cable with
l
ugged electrode cable for K316L-2 LN-
23P Wire Feeder.
O
rder:
K2393-1 25 ft (7.6 m)
K2393-2 75 ft (22.9 m)
M
agnum
®
3
50 Innershield
®
G
un
(for LN-23P)
Rated 350 amps, 60% duty cycle. For
.
068"-5/64" (1.7-2.0 mm) Innershield
®
wire and includes reduced speed
s
witch.
Order K345-10
Magnum
®
SG Spool Gun
Hand held semiautomatic wire feeder.
Requires SG Control Module and Input
Cable.
Order K487-25
SG Control Module
The interface between the power
source and the spool gun. Provides
control of the wire speed and gas flow.
For use
with a spool gun.
Order K488
Input Cable
(For SG Control Module)
For Lincoln engine power sources with
14-pin MS-type connection, separate
115V NEMA receptacles and output
stud connections.
Order K691-10
PLASMA CUTTING
Pro-Cut
®
55
Cuts metal using the AC generator
power from the engine-driven welder.
Accepts 3-phase or 1-phase input
power. Requires the K1816-1 Full KVA
adapter kit, if connected for 1-phase
input power.
Order K1580-1
Full-KVA Adapter Kit (1-Phase)
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-50P)
to the full-KVA receptacle on Lincoln
engine-driven welders.
Order K1816-1
Vantage
®
300
www.lincolnelectric.com
[7]
P
recision TIG
®
2
25
R
eady-Pak
®
P
kg.
F
or AC TIG Welding with square wave
p
erformance use the AC generator of
the engine-driven welder to supply
t
he power (full rated output may not
be available). Easy setup. Includes
t
orch, Foot Amptrol
®
a
nd Gas
R
egulator
& H
ose. Re-quires the
K1816-1 Full KVA adapter kit.
O
rder K2535-1
I
nvertec
®
V
205-T AC/DC
One-Pak
®
Package
F
or AC TIG welding with square wave
performance, use the AC generator
o
f the engine-driven welder to supply
t
he power. Easy setup. Includes
torch, parts kit, regulator and hose
k
it, Twist-Mate
™
t
orch adapter, work
cable with Twist-Mate end and foot
A
mptrol
®
.
Requires K1816-1 Full-KVA
A
dapter Kit.
O
rder K2350-2
Full - KVA Adapter Kit (1-Phase)
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-50P)
to the full-KVA receptacle on Lincoln
engine-driven welders.
Order K1816-1
WIRE FEEDER OPTIONS
LN-25 PRO Wire Feeder
Portable CC/CV unit for flux-cored
and MIG welding with MAXTRAC
®
wire drive system. Includes gas
solenoid and internal contactor.
Order K2613-1
Magnum
®
350 Innershield Gun
(for LN-25 PRO)
For self-shielded wire with 15 ft.
(4.5 m) cable. For .062"-3/32"
(1.6-2.4 mm) wire.
Order K126-2
Drive Roll and Guide Tube Kit
(for LN-25 PRO)
For cored or solid steel wire.
Order KP1697-068
for .068"-.072" (1.8 mm)
KP1697-5/64
for 5/64" (2.0 mm)
Magnum
®
300 MIG Gun
For .035"-.045" (0.9-1.2 mm) gas-
shielded wire with 15 ft. (4.5 m) cable.
LN-25 PRO Order:
K1802-1 (Includes Connector Kit)
Drive Roll and Guide Tube Kit
(for LN-25 PRO)
For .035" and .045" (0.9-1.1 mm)
solid steel wire.
Order KP1696-1