Filter
Top Products
No. of Passes 1 1 1 1 1-2 1-3 1-4
Leg Size – L (in.) 3/16 1/4 5/16 3/8 1/2 5/8 3/4
Electrode/AWS Class Fleetweld 5P, Fleetweld 5P+
(1)
/ E6010
Diameter (in.) 3/16 3/16 3/16 3/16 3/16 3/16 3/16
Current (Amps) 150 155 155 155 160 160 160
Polarity DC+ DC+ DC+ DC+ DC+ DC+ DC+
Arc Speed In./Min.
(2)
85324-1/2 4-1/2 4-1/2
Ft. of Weld/Hr.
(3)
40 25 15 10 6.8 4.4 3.0
Lbs. of Elec./Ft. of .137 .211 .346 .514 .850 1.31 1.93
Weld
-7-
V
ertical Up Fillet Welds
Overhead Fillet Welds
After first bead, the sequence
of bead placements starts on
vertical plate for each layer.
No. of Passes 1 1 1 1-2 1-3 1-6 1-10 1-15
Leg Size – L 5/32 3/16 1/4 5/16 3/8 1/2 5/8 3/4
Electrode/AWS Class Fleetweld 5P, Fleetweld 5P+ /E6010
Diameter
(in.)
5/32 5/32 5/32 5/32 3/16 3/16 3/16 3/16
Current (Amps) 130 170 170 170 170 170 170 170
Polarity DC+ DC+ DC+ DC+ DC+ DC+ DC+ DC+
Arc Speed In./Min.
(2)
7-1/2 9 5 7 7 7 7 7
Ft. of Weld/Hr.
(3)
38 45 25 18 12 6.9 4.4 3.1
Lbs. of Elec./Ft. of .100 .145 .253 .369 .532 .945 1.48 2.13
Weld
or
L
L
(1) 5/32” electrode can be used to allow better control.
(2) First pass only. On later passes adjust arc speed to obtain proper bead size.
(3) Total for all passes. 100% operating factor.