Filter
Top Products
OPTIONAL FIELD INSTALLED ACCESSORIES
K802N POWER PLUG KIT - Provides four 120V plugs rated at 20 amps each
and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may
not be compatible with NEMA common household receptacles.
K802-R POWER PLUG KIT - Provides four 120V plugs rated 15 amps each
and one dual voltage, full KVA plug rated at 120/240V, 50 amps, 120V plug is
compatible with NEMA common household receptacles.
K857 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CONTROL -
Portable control provides same dial range as the output control on the welder
from a location up to the specified length from the welder. Has convenient
plug for easy connection to the welder. The AIR VANTAGE® 500 CUMMINS
is equipped with a 6-pin connector for connecting the remote control.
K704 ACCESSORY SET - Includes 35 feet (10 m) of electrode
cable and 30 feet (9 m) of work cable, headshield, Filter plate,
work clamp and electrode holder. Cable is rated at 500 amps,
60% duty cycle.
K2641-2 FOUR WHEELED STEERABLE YARD TRAILER
For in plant and yard towing. Comes standard with a Duo-Hitch™,
a 2” Ball and Lunette Eye combination Hitch.
K2636-1 TRAILER - Two-wheeled trailer with optional fender and light
package. For highway use, consult applicable federal, state, and local laws
regarding possible additional requirements.
Comes standard with a
Duo-Hitch™, a 2” Ball and Lunette Eye combination hitch.
A fender
& a light package. Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Storage Rack
K887-1 ETHER START KIT - Provides maximum cold weather starting
assistance for frequent starting below
10°(-12°C)
. Required Ether tank is
not provided with kit.
K1847-1 SPARK ARRESTOR KIT - Easily mounts to standard muffler.
K1816-1 Full KVA Adapter Kit - Plugs into the 120/240V NEMA
14-50R receptacle on the case front (which accepts 4-prong
plugs) and converts it to a NEMA 6-50R receptacle (which
accepts 3-prong plugs) for connection to Lincoln Equipment with
a NEMA 6-50P plug,
T12153-9 Full-KVA Power Plug-One dual voltage plug rated at
120/240V, 50 amps, single phase.
Pipe Thawing with an arc welder can cause fire, explosion,
damage to electric wiring or to the arc welder if done
improperly. The use of an arc welder for pipe thawing is not
approved by the CSA, nor is it recommended or supported
by Lincoln Electric.
-------------------------------------------------------------------------------------
K2354-1 Air Dryer Kit-Minimizes water content in supply air.
Avoids cold weather air hose ice up.
K2356-1 Control Panel Cover Kit-Clear plexiglass cover to
protect control panel from dirt and debris, and to visually monitor
machine operation. Lockable to deter vandalism.
K2340-1 Lockable Fuel Cap / Flash Arrester Kit-For use in
locations where flash arrester safety is required. Lockable fuel
cap prevents tampering with fuel. Green cap color provides a
visual reminder to use diesel when refueling.
K2359-1 Cold Weather Heater and Tarp Kit-For extreme cold
conditions where normal engine starting is not sufficient.
Includes oil pan heater, engine water heater and radiator grill
tarp.
TIG OPTIONS
K870 Foot Amptrol®-Varies current while welding for making
critical TIG welds and crater filling. Depress pedal to increase
current. Depressing pedal fully achieves maximum set current.
Fully raising the pedal finishes the weld and starts the after flow
cycle on systems so equipped. Includes 25 ft. (7.6m) control
cable.
K963-3 Hand Amptrol®-Varies current for making critical TIG
welds. Fastens to the torch for convenient thumb control. Comes
with a 25 ft. (7.6m) cable. (for larger handle 18 or 26 series
torches)
C-1 ACCESSORIES C-1
AIR VANTAGE® 500 CUMMINS
WARNING