Filter
Top Products
A-2
INSTALLATION
SAM400 & 650
A-2
TECHNICAL SPECIFICATIONS - SAM650
Make/Model Description Speed (RPM) Displacement Starting Capacities
System
Perkins 6 cylinder High Idle 1790 365 cu. in
12VDC batteries
Fuel: 22.5 gal.
1006-6 Diesel 93 HP @ Low Idle 1200 (5.98 L)
(2)
& Starter 85.1 L
Engine 1730 RPM Full Load 1750
Bore x Stroke Oil: 14.0 Qts.
13.24 L
3.937” x 5.00”
(100mm x 127mm) Coolant: 5.5 gal.
20.8 L
INPUT - DIESEL ENGINE
RATED OUTPUT - WELDER
HEIGHT WIDTH DEPTH WEIGHT
56.7 in. 27.12 in. 88.75 in. 2800 lbs.
1440.2 mm 688.9 mm 2254.2 mm 1270.1 kg
OUTPUT - WELDER AND GENERATOR
Duty Cycle Welding Output Volts at Rated Amps
80% (NEMA) 650 Amps 44 volts
60%(NEMA) 725 Amps 44 volts
80%(Lincoln Plus) 650 Amps 50 volts
60%(Lincoln Plus) 725 Amps 50 volts
Welding Range Open Circuit Voltage Auxiliary Power
80 - 815 Amps 18 - 50 OCV 120/240 VAC
CV Current Range
(excluding hot start voltage)
2kVA, 60 Hz.
80 - 815 45 - 90 OCV 100% Duty Cycle
VV Current Range
PHYSICAL DIMENSIONS