Lumiscope sw-1000 Sander User Manual


 
Changing the battery
When the yellow indicator light on the front of the unit does not light up
when the unit is turned on, the battery should be replaced.
1. Remove the panel cover by pressing on the top and sliding down until it
is completely removed from the unit. This will reveal the battery compartment.
2. Remove the discharged battery from the device.
3. Place a new battery in the battery compartment. Note the proper polarity
alignment indicated on the battery and the compartment.
CARING FOR YOUR TENS DEVICE
Your TENS device may be cleaned by wiping gently with a damp cloth
moistened with mild soap and water. Never immerse the device in water or
other liquids.
Wipe lead wires with a damp cloth moistened with soap and water.
To properly store the TENS device for extended period of time, remove the
battery from the unit. Place the unit and accessories in the carrying case
and store in a cool, dry location.
08