Filter
Top Products
6
INSTALLATION
Movement and transport of planer
CAUTION:
• Watch your step when moving the tool.
Fold the sub-tables. Grasp the carrying handles when mov-
ing the tool.
When transporting it by vehicle, secure with a rope or other
substantial means to prevent tipping or movement.
Positioning the planer
Locate the tool in a well lit and level place where you can
maintain good footing and balance. Bolt/screw it to the work-
bench or planer stand (optional accessory) using the bolt
holes provided in the base.
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
CAUTION:
• Before plugging in the tool, always be sure that the tool
is switched off. The pilot lamp lights up when the tool is
plugged into the power source.
To start the tool, insert the key and raise the switch lever. To
stop it, lower the switch lever.
CAUTION:
• When not using the tool, remove the key and store it in a
secure place. This prevents unauthorized operation.
1. Carrying handle
2. Sub-table
1
2
003707
1. Bolt or screw
1
003708
1. Pilot lamp
2. Key
3. Switch lever
1
2
3
003709