Makita 217D Drill User Manual


 
4
Tool Use and Car e
12.Use clamps or other practical way to
secure and support the workpiece to a
stable platform.
Holding the work by hand or
against your body is unstable and may lead
to loss of control.
13.Donot forcetool. Use the correct tool for
your application.
Thecorrect tool will do the
job betterandsaferattherateforwhichitis
designed.
14.Donot use tool if switch does not turn it
on or off.
Atool that cannot be controlled
with the switch is dangerous and must be
repaired.
15.Disconnect battery pack from tool or
place the switchinthelockedor off posi-
tion before making any adjustments,
changing accessories, or storing the tool.
Such preventive safety measures reduce the
risk of starting the tool accidentally.
16.Store idle tools out of reach of children
and other untrained persons.
Tools are
dangerous in the hands of untrained users.
17.When battery pack is not in use, keep it
away from other metal objects like: paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a con-
nection from one terminal to another.
Shor ting the battery terminals together may
cause sparks, burns, or a fire.
18. Maintain tools with care. Keep cutting
tools sharp and clean.
Properly maintained
tools with sharp cutting edge are less likely to
bind and are easier to control.
19. Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tool’s
operation. If damaged, have the tool ser-
viced before using.
Many accidents are
caused by poorly maintained tools.
20. Use only accessories that are recom-
mended by the manufacturer for your
model.
Accessories that may be suitable for
one tool may create a risk of injury when
used on another tool.
SERVICE
21. Tool serv ice must be performed only by
qualified repair personnel.
Service or main-
tenance performed by unqualified personnel
may result in a risk of injury.
22. When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual.
Use of unauthorized par ts or failure to follow
Maintenance instructions may create a risk of
shock or injur y.
SPECIFIC SAFETY RULES
USB022-2
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to cordless driver safety
rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
1. Hold tool by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring.
Contact with a “live” wire will also make
exposed metal parts of the tool “live” and
shock the operator.
2. Be aware that this tool is always inan
operating condition, because it does not
have to be plugged into an electrical out-
let.
3. Always be sure you have a firm footing.