Filter
Top Products
11
For cutting circles between 70 mm (2-3/4”) and 121 mm
(4-3/4”) in radius.
For cutting circles between 121 mm (4-3/4”) and 221 mm
(8-11/16”) in radius.
NOTE:
Circles between 172 mm (6-3/4”) and 186 mm (7-5/16”) in
radius cannot be cut using this guide.
Align the center hole in the straight guide with the center of
the circle to be cut. Drive a nail less than 6 mm (1/4”) in
diameter into the center hole to secure the straight guide.
Pivot the tool around the nail in clockwise direction.
1. Wing nut
2. Wave washer
3. Flat washer
4. Center hole
5. Bolt
6. Guide plate
7. Straight guide
1
2
3
4
5
6
7
001710
1. Wing nut
2. Wave washer
3. Flat washer
4. Center hole
5. Bolt
6. Guide plate
7. Straight guide
1
2
3
4
5
6
7
001711
1. Nail
2. Center hole
3. Straight guide
1
2
3
001712