Filter
Top Products
12
Trimmer guide
Trimming, curved cuts in veneers for furniture and the like
can be done easily with the trimmer guide. The guide roller
rides the curve and assures a fine cut.
Install the trimmer guide on the tool base with the clamp
screw (A). Loosen the clamp screw (B) and adjust the dis-
tance between the bit and the trimmer guide by turning the
adjusting screw (1 mm (3/64”) per turn). At the desired dis-
tance, tighten the clamp screw (B) to secure the trimmer
guide in place.
When cutting, move the tool with the guide roller riding the
side of the workpiece.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
001713
1. Adjusting screw
2. Clamp screw (B)
3. Trimmer guide
4. Clamp screw (A)
1
2
3
4
001714
1. Workpiece
2. Bit
3. Trimmer guide
1
2
3
001715