Filter
Top Products
CAUTION:
0
Pressing excessively on the tool will not speed up the drilling. In fact, this excessive
pressure
will
only
serve
to
damage the tip
of
your
bit,
decrease
the
tool
performance
and
shorten the service life of the
tool.
0
There is a tremendous force exerted on the toolibit at the time of hole breakthrough. Hold
the
tool
firmly and exert care when the bit begins to break through the workpiece.
0
Astuck bit can be removed simply by setting the reversing switch to reverse rotation in order
to
back
out.
However, the
tool
may back out abruptly
if
you do not hold it firmly.
0
Always secure small workpieces in
a
vice or similar hold-down device.
11