Filter
Top Products
Reversing switch action
This tool has a reversing switch to change the
direction
of
rotation. Slide the reversing
switch
to
the right
for
clockwise rotation
or
to
the left for counterclockwise.
Reversing
switch
-
CAUTION:
0
Always check the direction
of
rotation before operation.
0
Use the reversing switch only when the
tool
comes to a complete stop. Changing the
Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work is
prolonged. Wait
20-30
seconds before resuming operation.
direction of rotation before the
tool
stops may ruin the
tool.
Holding tool
Hold the tool as shown in the figure.
When drilling a large diameter hole, hold the
tool
firmly with both hands.
a