Filter
Top Products
ADDITIONAL SAFETY RULES
FOR CHARGER AND TOOL
1.
The Charger and the tool are specifically designed to work together.
Do
not attempt
to charge any other cordless tool with this Charger.
Do
not attempt to charge the tool
with any other charger.
2.
Do
not charge the tool when temperature is BELOW
10°C
(50°F)
or ABOVE
45°C
(113°F).
3.
Do
not use charger in damp or wet locations.
4.
Do
not attempt to use a step-up transformer, an engine generator or
DC
power
5.
Do
not store the tool in locations where the temperature may reach or exceed
50°C
6.
Do
not incinerate the tool even if it is severely damaged or is completely worn out.
receptacle.
(122°F).
The tool can explode in a fire.
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always in an operating condition, because it does not have
to be plugged into an electrical outlet.
2.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
When drilling into walls, floors or wherever “live” electrical wires may be encoun-
tered,
DO
NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the plastic handle or plastic tool body to prevent electric shock
if
you drill into a “live” wire.
6.
Do
not leave the tool running. Operate the tool only when hand-held.
7.
Do
not touch the drill bit or the workpiece immediately after operation, they may be
extremely hot and could burn your skin.
SAVE
THESE INSTRUCTIONS.
5