Filter
Top Products
14.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit
of
checking to
see
that keys and adjusting wrenches
are
removed from tool before turning
it on.
15.
AVOID UNINTENTIONAL STARTING. Don‘t carry plugged-in
tool
with finger
on switch.
Be
sure switch
is
OFF
when plugging in.
16.
OUTDOOR
USE
EXTENSION CORDS. When
tool
is
used outdoors, use only
extension cords intended
for
use outdoors and
so
marked.
17.
STAY ALERT. Watch what you
are
doing, use common sense. Don’t operate
tool when you are tired.
18.
CHECK DAMAGED PARTS. Before further use
of
the tool, a guard
or
other
part that
is
damaged should be carefully checked to determine that it
will
operate properly and perform its intended function. Check
for
alignment
of
moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard
or
other part that
is
damaged should be properly repaired
or
replaced by an authorized serv-
ice
center unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by authorized service center. Don’t use
tool
if
switch does not turn it on and
off.
19.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces.
For
example; pipes, radiators, ranges, refrigerator enclosures.
20.
REPLACEMENT PARTS. When servicing, use only identical replacement
parts.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet,
etc.J
be sure the voltage supplied
is
the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for
the tool can result in SERIOUS INJURY to the user
-
as
well
as
damage to
the
tool.
If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with
voltage
less
than the nameplate rating
is
harmful to the motor.
3