Filter
Top Products
ADDITIONAL SAFETY
RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do not charge Battery Cartridge when temperature
is
BELOW 10°C
(5OoF)
or
ABOVE 4OoC (104OF).
2.
Do not attempt to use a step-up transformer, an engine generator
or
DC power
3.
Do not allow anything to cover
or
clog the charger vents.
4.
Always cover the battery terminals with the battery cover when the battery
5.
Do
not short the battery cartridge:
receptacle.
cartridge
is
not used.
(1)
Do not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge in a container with other metal objects such
(3)
Do
not expose battery cartridge to water
or
rain.
as nails, coins, etc.
A
battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
6.
Do not store the
tool
and Battery Cartridge in locations where the tempera-
7.
Do not incinerate the Battery Cartridge even
if
it
is
severely damaged
or
is
ture may reach
or
exceed 5OoC
(122OF).
completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY
RULES
1.
Be
aware that this tool
is
always in an operating condition, because it does
2.
Always be sure you have a firm footing.
3.
Hold the
tool
firmly.
4.
Keep hands away from rotating parts.
5.
When drilling into walls,
floors
or
wherever "live" electrical
wires
may be
encountered, DO NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the
tool
only by the insulated grasping surfaces
to
prevent electric shock
if
you drill into a "live"
wire.
not have to be plugged into an electrical outlet.
Be sure no one
is
below when using the tool in high locations.
6.
Do
not leave the tool running. Operate the tool only when hand-held.
7.
Do not touch the drill bit
or
the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5