Filter
Top Products
Installing
or
removing drill bit
or
driver bit
CAUTION
:
Always be sure that the
tool
is switched
off
and the battery cartridge is removed before
installing
or
removing the bit.
To
install the bit, place
it
in
the chuck as
far as
it
will go. Tighten the chuck by hand.
Place the chuck key in each
of
the three
holes and tighten clockwise. Be sure
to
tighten all three chuck holes evenly.
To
remove the bit, turn the chuck key
counterclockwise in just one hole, then
loosen the chuck
by
hand.
Chuck
key
I
I
Chuck
key
7