Filter
Top Products
14.
REMOVE ADJUSTING
KEYS
AND WRENCHES. Form habit of checking to
see
that keys and adjusting wrenches
are
removed from
tool
before turning
it on.
15.
AVOID UNINTENTIONAL STARTING. Don't carry plugged-in
tool
with finger
on switch.
Be
sure switch
is
OFF when plugging in.
16.
OUTDOOR USE EXTENSION CORDS. When tool
is
used outdoors, use only
extension cords intended for use outdoors and
so
marked.
17.
STAY
ALERT.
Watch
what
you
are
doing,
use
common sense. Don't operate
tool
when you are tired.
18.
CHECK DAMAGED PARTS. Before further use of the tool, a guard
or
other
part that
is
damaged should be carefully checked to determine that it
will
operate properly and perform its intended function. Check
for
alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A guard
or
other part
that
is
damaged should be properly repaired
or
replaced by an authorized
service center unless otherwise indicated elsewhere in this instruction
manual. Have defective switches replaced by authorized service center. Don't
use tool
if
switch does not turn it on and off.
19.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces.
For
example; pipes, radiators, ranges, refrigerator enclosures.
20.
REPLACEMENT PARTS. When servicing, use only identical replacement parts.
VOLTAGE WARNING: Before connecting the tool
to
a power source (receptacle,
outlet, etc.) be sure the voltage supplied
is
the same as that specified on the
nameplate
of
the tool. A power source with voltage greater than that specified
for
the tool can result in SERIOUS INJURY to the user
-
as
well
as damage to
the tool. If in doubt, DO NOT PLUG
IN
THE TOOL. Using a power source with
voltage
less
than the nameplate rating
is
harmful to the motor.
3