Filter
Top Products
ADDITIONAL SAFETY
RULES
FOR
CHARGER
&
BATTERY CARTRIDGE
1.
Do
not charge Battery Cartridge when temperature
is
BELOW 10°C
(5OOF)
2.
Do not attempt to use a step-up transformer, an engine generator
or
DC power
3.
Do
not allow anything to cover
or
clog the charger vents.
4.
Do
not short the battery cartridge:
or
ABOVE 4OoC
(104OF).
receptacle.
(1)
Do
not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge in a container with other metal objects such
(3)
Do
not expose battery cartridge to water
or
rain.
as nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
5.
Do not store the tool and Battery Cartridge in locations where the tempera-
6.
Do
not incinerate the Battery Cartridge even if it
is
severely damaged
or
is
ture may reach
or
exceed 5OoC
(122OF).
completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY
RULES
1.
Be
aware that this tool
is
always in an operating condition, because it does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
When drilling into walls, floors
or
wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if
you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be
sure
no
one
is
below when using the tool in high locations.
6.
Do not leave the tool running. Operate the tool only when hand-held.
7.
Do
not touch the drill bit
or
the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5