Filter
Top Products
Installing or removing driver bit or drill bit
CAUTION
:
Always
be
sure that the
tool
is switched
off
and the battery cartridge
is
removed
before
installing
or
removing the bit.
Hold the ring and
turn
the sleeve counter-
clockwise
to
open the chuck jaws. Place
the bit
in
the chuck as
far
as
it
will
go.
Hold the ring firmly and turn the sleeve
clockwise
to
tighten the chuck.
To
remove the bit, hold the ring and turn
the sleeve counterclockwise.
Storage
of
driver bit
When not using the driver bit, keep it
in
the storage cavity on the
tool.
CAUTION
:
Before inserting the battery cartridge into the tool, always check to
see
that the trigger
switch actuates properly and returns
to
the
"OFF"
position when released.
Reversing switch action
This tool has a reversing switch
to
change
the direction
of
rotation. Slide the revers-
ing switch
to
the right
for
clockwise rota-
tion
or
to
the left
for
counterclockwise.
CAUTION
:
Always check the direction
of
rotation before operation.
*Use the reversing switch only when the tool comes
to
a
complete stop. Changing the
direction of rotation before the tool stops may ruin the tool.
I