Filter
Top Products
Screwdriving operation
Place
the point
of
the driver bit
in
the
screw head and apply pressure to the
tool.
Start the
tool
slowly and then increase the
speed gradually. Release the trigger as
soon
as the clutch cuts
in.
Nominal diameter
of
wood screw
(mm)
3.1 (1/8”)
NOTE
:
.Make sure that the driver bit is inserted
st
bit may be damaged.
When driving wood screws, predrill pilot
holes
to
make driving easier and
to
pre-
vent splitting
of
the workpiece. See the
chart.
Recommended size
of
pilot hole
Wnm)
2.0
-
2.2
15/64”
-
3/32’,)
:raight in the screw head, or the screw and/or
I’
2.2
-
2.5
(3/32”
-
3/32”)
3.5
19/64”)
I’
3.3
~
3.6
1118’’
-
9/64‘,)
5.1 (13164”)
9