Filter
Top Products
14.
REMOVE ADJUSTING
KEYS
AND WRENCHES. Form habit of checking to
see
that keys and adjusting wrenches are removed from tool before turning
it on.
15.
AVOID UNINTENTIONAL STARTING. Don't carry plugged-in
tool
with finger
on switch.
Be
sure switch
is
OFF
when plugging in.
16.
OUTDOOR USE EXTENSION CORDS. When tool
is
used outdoors, use only
extension cords intended
for
use outdoors and
so
marked.
17.
STAY ALERT. Watch what
you
are doing, use common sense. Don't operate
tool when you are tired.
18.
CHECK DAMAGED PARTS.
Before
further use of the tool, a guard
or
other
part that
is
damaged should be carefully checked
to
determine that
it
will
operate properly and perform
its
intended function. Check for alignment
of
moving parts, binding
of
moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A guard
or
other part
that
is
damaged should be properly repaired
or
replaced by an authorized
service center unless otherwise indicated elsewhere in this instruction
manual. Have defective switches replaced
by
authorized
service
center. Don't
use
tool
if switch does not turn it on and off.
19.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces.
For
example; pipes, radiators, ranges, refrigerator enclosures.
20.
REPLACEMENT PARTS. When servicing, use only identical replacement parts.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet,
etc.)
be sure the voltage supplied
is
the same
as
that specified on the
nameplate
of
the tool. A power source with voltage greater than that specified
for the tool can result in
SERIOUS
INJURY to the user
-
as
well
as
damage to
the
tool.
If
in doubt, DO NOT PLUG
IN
THE TOOL. Using a power source with
voltage
less
than the nameplate rating
is
harmful
to
the motor.
3