Filter
Top Products
Holding
tool
Hold
the
tool
as
shown
in
the figure.
When drilling a large diameter hole, hold
the tool firmly with both hands.
Switch action
Move the reversing switch lever
to
the
"FWD" position for clockwise rotation
or
the
"REV"
position
for
counterclockwise.
To
start the tool, simply pull the trigger.
Release the trigger
to
stop. When the revers-
ing switch lever
is
in the neutral position,
the
tool
will
not start even
if
you pull the
trigger.
I\
\
I
ill
Reversing
switch
lever
FWD
CAUTION
:
0
Always check the direction
of
rotation before drilling.
*Use the reversing switch lever only when the
tool
comes
to
a complete stop. Changing
When not operating the tool, keep the reversing switch lever in the neutral position.
the direction
of
rotation before the
tool
stops may ruin the
tool.
7