Filter
Top Products
Charging
Connect
the
charging plug to
the
charging
connector,
then
plug
in
the charger to the
power receptacle. Charging
takes
3
hours.
CAUTION:
*The battery
in
your
new
tool
is
not
fully
charged. You will need to charge
it
before
use.
Do
not operate the tool during charging.
Overcharging more than
2
days consider-
ably shortens
the
battery service life.
Always
unplug
the
charger after completing
the
charge.
Charging plug
Installing
or
removing driver bit
or
drill bit
CAUTION
:
Always set the reversing switch lever to the neutral position before installing or removing
the bit.
Hold
the
ring
and
turn
the sleeve counter-
clockwise to open the chuck jaws. Place
the bit
in
the chuck as far as
it
will go.
Hold the
ring
firmly and
turn
the sleeve
clockwise to tighten the chuck.
To
remove the bit, hold the
ring
and
turn
the sleeve counterclockwise.
Sleeve
Ring
6