Makita 6831D Power Screwdriver User Manual


 
Carry
hook
The carry hook is convenient for temporarily
hanging the tool. It can be installed on either
left or right side of the tool.
Hook
Switching
ON
and
OFF
CAUTl ON:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the
"OFF"
position when released.
To
switch on, press the trigger.
To
switch off, release the trigger.
Switch trigger
\
Driving operation
Switch on the tool by pressing the trigger.
Hold the tool squarely against the workpiece
and apply forward pressure to the tool. The
screw will be automatically carried
to
the
driving position and driven into the
workpiece.
CAUTION:
Do
not fire the tool without screws. This will damage the workpiece.
If the feeder box becomes sluggish in operation, spray car wax (spray type wax) on its
sliding surfaces. Never lubricate
it.
10